Float & Thermostatic Steam Traps

B Series Float & Thermostatic Steam Traps
A Series Float & Thermostatic Steam Traps
AIC Series Float & Thermostatic Steam Trap
JD/KD Series Float & Thermostatic Steam Traps
LS/MS Series Float & Thermostatic Steam Traps
ICS Series Float & Thermostatic Steam Traps
L/M Series Float & Thermostatic Steam Traps
FT Series Float & Thermostatic Steam Traps
FF-4000 Series Float and Thermostatic Steam Trap with freely floating ball
FF-4700/4900 High Pressure Float and Thermostatic Steam Trap with Freely Floating Ball
Float & Thermostatic Replacement Cap Assembly

JD/KD Series Float & Thermostatic Steam Traps

DUCTILE IRON FOR HORIZONTAL INSTALLATION, WITH THERMOSTATIC AIR VENT

For pressures to 300 psig (21 barg) . . .
Capacities to 142 000 lb/hr (64 400 kg/hr)

The simple, yet rugged, ductile iron construction of the JD & KD Series Ultra-Capacity F&T steam traps offer long, trouble-free service. All floats, valves and seats and lever mechanisms are constructed of stainless steel.

The integral thermostatic air vent is a balanced-pressure phosphor-bronze bellows caged in stainless steel. It is designed especially for demanding industrial applications where highly efficient, uninterrupted service is essential. This balanced-pressure type of air vent will respond to the pressure-temperature curve of steam at any pressure from zero to 300 psig (21 bar). Thus-up to 300 psig (21 bar)-air is vented at slightly below steam temperature.