Spray Nozzles

Model 038	Model 038TG

Model 038 Spray Nozzle - traditional rubber cushioned rear trigger design suggested for wash down applications below 140˚F (60˚C)

Model 038TG Spray Nozzle – New and improved ergonomics with enhanced safety features 038TG is suitable for washdown applications up to 200F.

WashDown Hose

Armstrong’s heavy duty “Safety Yellow” Washdown Hose is designed to withstand the intensities of the industrial environment. The Washdown Hose is supplied as standard in 25' and 50' (7.6 m and 15.2 m) lengths with custom lengths available on demand.

Model 041	Model 041R

Model 041

Heavy-duty polished Type 304 Stainless steel satellite hose rack is constructed with integral mounting brackets for easy mounting in a location remote to the mixing valve or hot/cold water source.

Model 041R

Heavy-duty polished Type 304 Stainless steel replacement hose rack for Steamix and Armstrong Hot & Cold Water Hose Stations. 

Hose Reels

Model 047-82 Hose Reel	Model 047-81 Hose Reel

Red spring-retractable hose reels suitable for use with all Armstrong hose station assemblies. Hose Reels will store up to 75' (22.8 m) of 3/4" (20 mm) wash down hose. Hose Reels are provided fully assembled inclusive of wash down hose (ordered separately), an adjustable hose bumper stop to maintain the desired length of hose outside of the reel and 4' (1.2 m) flexible adapter hose for connection to water source.

Also available in Stainless Steel: Suffix SS

Ball-Type Flow Indicators (BFI)

Flow indicators are designed to monitor gas, air, oil, water and other liquids at both maximum and minimum flow rates. The action is simple and highly visible. Flow through the unit makes the white ball oscillate in the dome. If the flow stops, the ball drops out of sight. The movement of the ball cannot be missed, even in poorly lighted areas and at significant distances. With only one moving part—the ball—there is virtually nothing to go wrong.

Sizes and models

The standard ball-type flow indicator is made in 1/2", 3/4" and 1" (15, 20 25 mm) NPT-compatible sizes, with a die-cast brass body and a shatter-resistant borosilicate dome. The indicators are suitable for temperatures up to 180˚F (82˚C) and pressures up to 100 psi (7 bar).

The 1/2" (15 mm) indicator is supplied as standard with special high-temperature joint rings and a glass-filled PTFE Teflon ball, permitting use at temperatures up to 250˚F (120˚C).

The high-pressure model of the 1/2" (15 mm) indicator has an aluminum-bronze body and high-pressure cap assembly for pressures up to 300 psi (21 bar). It also contains a high-temperature ball for up to 250˚F (120˚C).